DIS-IP200日本CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
 |
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 |  |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP50日本CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP5日本CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP05日本CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
最新產品
- 豬偽狂犬病毒（PRV）ELISA檢測試劑盒 2024/10/23 23:25:21
- 氦孔隙度自動測定儀 2024/10/23 23:18:58
- 氦孔隙度自動測定儀 2024/10/23 23:15:38
- 人ATP酶（ATPase）ELISA檢測試劑盒 2024/10/23 22:54:25
- 人OX40 Ligand（OX40L）ELISA檢測試劑盒 2024/10/23 22:38:46
- 人Dickkop f3（DKK3）ELISA檢測試劑盒 2024/10/23 22:32:28
- Rat IL-1SRⅡ(Soluble Interleukin-1 Receptor Ⅱ) ELISA Kit 2024/10/23 21:11:16
- Rat IL-2Rα(Interleukin-2 Receptor-α) ELISA Kit 2024/10/23 21:11:15
- Rat IKBα(Inhibitory Subunit of NF-κBα) ELISA Kit 2024/10/23 21:11:15
- Rat IgG2a(Immunoglobulin G2a) ELISA Kit 2024/10/23 21:11:14
- Rat IGFBP-2(Insulin-like growth factor-binding protein 2) ELISA Kit 2024/10/23 21:04:12
- Rat Ikbkb(Inhibitor of nuclear factor kappa-B kinase subunit beta) ELISA Kit 2024/10/23 21:04:11
- Rat IGFBP-6(Insulin-like growth factor-binding protein 6) ELISA Kit 2024/10/23 21:04:10
- Rat IgE(Immunoglobulin E) ELISA Kit 2024/10/23 21:04:10
- Rat IFABP/FABP2(Intestinal Fatty Acid Binding Protein) ELISA Kit 2024/10/23 20:54:28
- Rat ICTP(C-Telopeptide of Type I Collagen) ELISA Kit 2024/10/23 20:54:28
- Rat ICD(Isocitrate Dehydrogenase) ELISA Kit 2024/10/23 20:54:27
- Rat COL4α1(Collagen Type IV Alpha 1) ELISA Kit 2024/10/23 20:36:08
- Rat COL3(Collagen Type Ⅲ) ELISA Kit 2024/10/23 20:36:08
- Rat CORT(Corticosterone) ELISA Kit 2024/10/23 20:36:08
- Rat CORT(Corticosterone) ELISA Kit 2024/10/23 20:36:07
- S參數測試意義 一致性測試 S參數測試 信號完整性測試 硬件測試 2024/10/23 20:31:54
- Rat CP(Ceruloplasmin) ELISA Kit 2024/10/23 20:30:54
- S參數測試意義 示波器 一致性測試 S參數測試 信號完整性測試 2024/10/23 20:30:43
- S參數測試意義 測試方案 一致性測試 S參數測試 信號完整性測試 2024/10/23 20:29:35
- S參數測試意義 測試方案 一致性測試 S參數測試 2024/10/23 20:28:11
- S參數測試意義 S參數測試方案 一致性測試 S參數測試 2024/10/23 20:27:08
- S參數測試方法 淼森波 S參數測試方案 一致性測試 S參數測試 2024/10/23 20:25:45
- 淼森波實驗室 S參數測試方法 S參數測試方案 一致性測試 S參數測試 2024/10/23 20:24:34
- Rat CYPA(Cyclophilin A) ELISA Kit 2024/10/23 20:24:07