DI-3N-IP5/IP50/IP200/IP500扭力校正儀
產品名稱： DI-3N-IP5/IP50/IP200/IP500扭力校正儀
制 造 商： 思達(CEDAR)
產品種類： 測力、拉力儀器
所屬行業： 電子及電路板工業模具及五金制造行業
深圳吉田科技發展有限公司是一家大型工具量具代理商！我公司經營產品如下: 1、 日本制：TOHNICHI（東日）扭力起子、起力扳手、扭矩表、瓶蓋扭力測試儀 2、 日本制：KANON（中村）扭力工具、起力工具測試儀； 3、 日本制：思達(CEDAR)電批扭力測試儀;亞通力(ATTONIC)電批扭力測試儀； 4、 日本制：AIKOH（愛光）指針、數顯式推拉力計、按鍵測試儀、彈簧拉壓力測試儀； 5、 日本制：SHIMPO（電產）數顯式推拉力計； 6、 日本制：ALGOL指針式推拉力計； 7、 日本制：PEAK（東海）放大鏡； 8、 日本制：EIESN精密針規、SK精密針規； 9、 日本制：MITUTOYO（三豐）測量工具； 10、日本制：JPG精密塞規、環規； 11、日本制：PEACOCK（孔雀）百分表、千分表、測厚表、深度表； 12 日本制：TELOCK（得樂）橡膠硬度計、測厚規、深度表； 13、日本制：FUJITOOL（富士）半徑規、角度尺； 14、日本制：KANETEC（強力牌）V型磁性座、磁性表座； 15、日本制：TOKYO SEIKI（精機株式會社）橫向張力計及紡織專用張力計； 16、日本制：YOKOGAWA（橫河）張力計、線速計；
相關產品鏈接:DI-3N-IP5/IP50/IP200/IP500扭力校正儀 DI-3N-IPS扭力校正儀
DI-3N-IPS扭力校正儀
產品名稱： DI-3N-IPS扭力校正儀
制 造 商： 思達(CEDAR)
產品種類： 測力、拉力儀器
所屬行業： 電子及電路板工業模具及五金制造行業
DI-3N-IPS扭力校正儀特點:
誤差 ±0.5% 功能 LC:LCD顯示
RS：RS232C輸出口，LH：扭力設定功能；
MY：數據記憶功能
PO：電源自動關閉功能
IO：設定自動清零
外形尺寸 88(W)×108(D)×40(H)（不含測頭）
配件 測量頭1個DC20mmM4/M6/M8
包裝盒AC充電器各一個
深圳吉田科技發展有限公司是一家大型工具量具代理商！我公司經營產品如下: 1、 日本制：TOHNICHI（東日）扭力起子、起力扳手、扭矩表、瓶蓋扭力測試儀 2、 日本制：KANON（中村）扭力工具、起力工具測試儀； 3、 日本制：思達(CEDAR)電批扭力測試儀;亞通力(ATTONIC)電批扭力測試儀； 4、 日本制：AIKOH（愛光）指針、數顯式推拉力計、按鍵測試儀、彈簧拉壓力測試儀； 5、 日本制：SHIMPO（電產）數顯式推拉力計； 6、 日本制：ALGOL指針式推拉力計； 7、 日本制：PEAK（東海）放大鏡； 8、 日本制：EIESN精密針規、SK精密針規； 9、 日本制：MITUTOYO（三豐）測量工具； 10、日本制：JPG精密塞規、環規； 11、日本制：PEACOCK（孔雀）百分表、千分表、測厚表、深度表； 12 日本制：TELOCK（得樂）橡膠硬度計、測厚規、深度表； 13、日本制：FUJITOOL（富士）半徑規、角度尺； 14、日本制：KANETEC（強力牌）V型磁性座、磁性表座； 15、日本制：TOKYO SEIKI（精機株式會社）橫向張力計及紡織專用張力計； 16、日本制：YOKOGAWA（橫河）張力計、線速計；
相關產品鏈接:DI-3N-IP5/IP50/IP200/IP500扭力校正儀 DI-3N-IPS扭力校正儀
DIS-RL05日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL6日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL2日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DI-3N系列日本思達牌扭力校正儀
日本思達牌扭力校正儀 | ||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||
DI-RL6CEDAR思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂（DIS series） 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% （or less 499亇3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （rightleft） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories （one piece each） | 兂4 bits （亄）丂侐0/侐1 | 6.35HEX bits （亄）丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DI-RL2CEDAR思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂（DIS series） 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% （or less 499亇3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （rightleft） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories （one piece each） | 兂4 bits （亄）丂侐0/侐1 | 6.35HEX bits （亄）丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL6日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL2日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
最新產品
- CLJ-B1030大流量激光塵埃粒子計數器 2024/11/24 18:55:10
- 橡膠高低溫抗拉伸力強度試驗機 2024/11/24 14:41:42
- 中心血站冰凍血漿水浴解凍箱 2024/11/24 14:33:52
- 血站冰凍血制品解凍箱 2024/11/24 14:33:25
- CMC-185-MX成都軟起動經銷MCD201-110-T4-CV3 SSD-55KW ATS22C25Q XYR6-37KW 2024/11/24 14:31:27
- 冰凍血制品恒溫解凍箱 2024/11/24 14:30:42
- 隔水式恒溫血漿解凍箱 2024/11/24 14:30:13
- 輸血科冰凍血漿解凍儀 2024/11/24 14:29:31
- 醫用冰凍血制品解凍儀 2024/11/24 14:28:47
- 水浴式血制品血漿解凍箱 2024/11/24 14:27:29
- 臺式血漿解凍箱 2024/11/24 14:27:07
- 循環水式血漿解凍箱 2024/11/24 14:26:12
- 血液科血液制品血漿解凍箱 2024/11/24 14:25:43
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@報價已更新 2024/11/24 13:45:34
- 發布動態/強力v1/抗檢測強力v1/高品質原料@產品價格 2024/11/24 13:44:18
- 發布動態/鹽酸達泊西汀/達泊西丁原料@產品價格 2024/11/24 13:43:06
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/動態已更新 2024/11/24 13:41:57
- 發布動態/奧利司他/奧利司他原料@產品價格 2024/11/24 13:40:39
- 發布動態/他達那非/他達那非原料/產品價格 2024/11/24 13:39:29
- 發布動態/育亨賓/鹽酸育亨賓原料@產品價格 2024/11/24 13:38:17
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/已更新報價 2024/11/24 13:37:08
- 發布動態/西地那非/西地那非原粉/西地原料/產品價格 2024/11/24 13:35:47
- 發布動態/金陽堿/金陽堿原料@產品價格 2024/11/24 13:34:37
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@產品價格 2024/11/24 13:33:36
- 發布動態/強力v1/抗檢測強力v1/高品質原料@動態播報 2024/11/24 13:32:23
- 發布動態/鹽酸達泊西汀/達泊西丁原料@動態播報 2024/11/24 13:31:19
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/產品功能 2024/11/24 13:29:38
- 發布動態/奧利司他/奧利司他原料@動態播報 2024/11/24 13:28:05
- 發布動態/他達那非/他達那非原料/動態播報 2024/11/24 13:27:05
- 發布動態/育亨賓/鹽酸育亨賓原料@動態播報 2024/11/24 13:25:57