国产在线不卡一区,国产精品特级毛片一区二区三区,www.亚洲天堂

DIS-IP200�ձ�˼�_Ť��yԇ�x��

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP5�ձ�˼�_Ť��yԇ�x��

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP50�ձ�˼�_Ť��yԇ�x

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP5�ձ�˼�_Ť��yԇ�x

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IPS20C�ձ�˼�_Ť��yԇ�x

Measurement of bolting machines

�� TORQUE TESTER �@DIS-IPS

Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds atis needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output

DIS-IPS
Specification		DIS-IPS20C	DIS-IPS5C
Measuring range		0.20�`20 N�m �@�@2.0�`200 kgf�Ecm�@�@ 2.0�`180 lbf�Ein	0.020�`5 N?/span>m 0.20�`50 kgf�Ecm 0.20�`45 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword.
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance		Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - about 3hours
Continunous working time		12 hours
Attachment fit mouth		��20��m�@
Meter outside type dimension		100�iW�j�~105�iD�j�~33�i�g�j
Weight		Meter part 520g
Attachment		Fixed Attachment�@��20�o�@M4/M5/M6/M8
		OW joint�@OW-20	OW joint�@OW-10
Accessories (one piece each)		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, a traceability system figure

OW joint is a measurement end at one-touch. It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time

DIS-IP200�ձ�˼�_Ť��yԇ�x��

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP5�ձ�˼�_Ť��yԇ�x��

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP500�ձ�˼�_Ť��yԇ�x

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP200�ձ�˼�_Ť��yԇ�x

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

DIS-IP500�ձ�˼�_Ť��yԇ�x

Measurement of torque driver / torque wrench

�� TORQUE TESTER �@DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	�cIS-�h�o5	�cIS-�h�o50	�cIS-�h�o200	�cIS-�h�o500
Measuring range (at time of Track)		2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein	030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy		�}0.5% (499 or less digit�}3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
�`	��40	��50	��60	��80
�a	41.2	63	73	99
�b	5	10	10	15.5
�c	��60	��90	��110	��140
�d	��50	��74	��90	��116
�e(Three division)	��4.2	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	6.35��	9.5��	12.7��	19��
weight	189��	632��	1.8��	3��

亚洲视频福利,日本精品一区二区三区在线,日韩欧美在线视频一区二区,国产高清自产拍av在线,99久久99久久精品国产片果冻,国产视频手机在线,成人禁在线观看午夜亚洲

DIS-IP200�ձ�˼�_Ť��yԇ�x��

DIS-IP5�ձ�˼�_Ť��yԇ�x��

DIS-IP50�ձ�˼�_Ť��yԇ�x

DIS-IP5�ձ�˼�_Ť��yԇ�x

DIS-IPS20C�ձ�˼�_Ť��yԇ�x

DIS-IP200�ձ�˼�_Ť��yԇ�x��

DIS-IP5�ձ�˼�_Ť��yԇ�x��

DIS-IP500�ձ�˼�_Ť��yԇ�x

DIS-IP200�ձ�˼�_Ť��yԇ�x

DIS-IP500�ձ�˼�_Ť��yԇ�x

��®a(ch��n)Ʒ