TG-GP1X周波控制器（可控硅調功器）
特點：1、控制可控硅的導通周波，進而控制可控硅在相對運行周期內的導通率。達到連續調節可控硅負載功率之目的。2、相對運行周期為不大于1的變周期。在相同導通率的情況下，以較短相對運行周期工作。控制分辨率達1％，控制溫度時，精度、溫度波動小。3、手動/自動切換方便，“來電”或切換到“自動”時有16鐘的軟過渡。手動操作時，自成簡單的開環控溫系統。4、光柱直觀顯示可控硅的負載實際功率百分比大小。5、既有直接驅動大電流可控硅（或可控硅組）的觸發輸出端，又有驅動“過零觸發固態繼電器”（SSR）的輸出信號？梢晫際情況選擇不同的觸發大電流可控硅（或可控硅組）的方式。6、光柱閃爍提示部分異常情況及故障，方便報警及故障排除。7、帶有保護用輸入端，以便在主電路可控硅出現溫度過、過載等保護信號到來時，及時切斷控制器的輸出信號，阻止主電路大可控硅導通，同時光柱閃爍報警。8、控制器均可觸發雙向可控硅或反并聯可控硅，對可控硅的觸發電流及電流、電壓上升率無需挑選。9、“過零觸發”？煽毓栎敵鐾暾恼也ɑ蛲暾恼野氩，其輻射干擾 、傳導干擾及負載電流的瞬間浪涌都很小？煽毓柽\(yùn)行時無噪聲，壽命長。10、三相電路各自單獨同步，各相可控硅都輸出完整的正弦波或完整的正弦半波。11、有多種輸入信號形式選擇，有盤裝式、架裝式、單相、三相多種結構的控制器供選用。12、拔插式的接線端子，接線容易，拆換方便。13、提供SSR模塊觸發信號輸出，以方便利用過零觸發模塊觸發三相電路主可控硅（模塊與主可控硅同置處）。周波控制器與主可控硅相距較遠的情況下，可節省線纜根數。
| 型號 | 類別 | 適用電源 | 輸入信號類別 |
| TG-GP1X | 單相盤裝式 | 單相220V、380V、50Hz | X=1時為4～20mA； X=2時為1～5V； X=3時為0～10mA； X=4時為0～10V。 |
| TG-GP3X | 三相盤裝式 | 三相380V、50Hz | |
| TG-GJ1X | 單相架裝式 | 單相220V、380V、50Hz | |
| TG-GJ3X | 三相架裝式 | 三相380V、50Hz |
8、運行周期：≦1s。
15、重量：0.5kg。
7300A中國一級代理英國歐陸7300A可控硅調功器
可選的功能包括：過流報警
診斷局部負載故障報警（DLF）
功率控制模式
電流限幅/關斷
變壓器負載延遲觸發
通訊
技術規格
尺寸描述（mm）: | |
| 16到40A:220H＊96W＊2215D,基本單元 |
| 220H＊96W＊243D,帶可選裝置 |
| 40A以上：咨詢歐陸 |
使用環境溫度： |
|
| 在額定電流時，0℃～45℃ |
安裝： |
|
| 面板安裝 |
負載類型： |
|
| 阻性負載（低或高溫度系數） |
| SWIR負載（短波紅外線） |
| 感性負載 |
| 變壓器負載 |
輸入： |
|
| 0-20mA,4-20mA,0-5V,0-10V |
觸發模式： |
|
| 相角觸發，單周期循環，的單周期循環觸發，脈沖出發，變送器脈沖觸發 |
數據表： | HA027989 |
|
|
EPOWER歐陸可控硅調功器EPOWER
EPower™控制器－－不同凡響的功率控制技術 EPower控制器是歐陸功率控制器系列中的產品，它使用技術和創新設計來管理您的工藝并降低您的能源成本。它在各個層面都具有最能滿足您現在和將來需要的靈活性。讓我們使用EPower控制器為您進行功率控制，您大可放心：您的工藝已經實現了控制方式—即便是工藝有變化時。 歐陸擁有雄厚的研發實力，并制訂有持續開發、改進和創新的政策。 投資購買EPower控制器可在任何時候滿足您不斷變化的需求，給予您選擇的自由，讓新開發變得觸發可及。 創新的模塊性和可配置性，能滿足您的各種需求... 通過模塊化設計便于訂購、配置和維護。 EPower控制器可滿足您不斷變化的需求。 盡可能減少備件庫存—許多選項可通過共用驅動模塊配置，如觸發方式、負載、相位、控制等。 多達四個功率模塊可提供單相和多相控制。 可通過軟件配置的選項更具靈活性。
您不會再受到訂購可選件的限制—EPower控制器為您提供可配置的可選件和模塊化硬件，讓您能靈活地適應現在和將來的要求。加上便于通過集成顯示屏進行配置和通過iTools配置工具實現圖形配置的標準儀器—您的功率控制器讓生活變化更加簡單。 靈活性–采用的模塊化技術，易于使用，能滿足功率控制的需要。 －－具有創新功能的功率控制，能在上降低能源成本，工藝性能出眾。 放心—可讓您收回投資的功率控制器，可適應您今后的需求變化－一種產品可適合于各種方案。
您需要的可選件... 單個驅動模塊可支持多達四個功率模塊－－從而支持四條獨立的控制回路。功率模塊的額定電流范圍為100A到400A。驅動模塊本身還支持可選件板卡，讓您的解決方案更具靈活性。 通信– RS485 Modbus RTU, Profibus, DeviceNet® 和Modbus TCP網絡協議。 預估負載管理(PLM)＊ –能管理多臺機器的功率需求以節省能源成本的強大功能。
靈活的輸入/輸出–本驅動模塊支持標準的輸入/輸出接口和多達三塊帶模擬輸入接口、模擬輸出接口、數字輸入/輸出接口和繼電器輸出接口的附加輸入/輸出板卡。 ＊ 正在申請專利 選購指南和技術規格
EPower CONTROLLER EUROTHERM® FLEXIBLE SOLUTIONS THE FUTURE OF POWER CONTROL ™ PLM PLM PLM Predictive Load Management EPower Controllers are the latest products in the Eurotherm range of power controllers. It uses the newest technologiesinnovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements nowin the future. Let us look after your power control for you with EPower Controllersgive you the peace of mind that you have the best for your process – even as it changes. Eurotherm has a significant R&D capabilitya policy of continuous development, improvementinnovation. Investing in EPower Controllers will keep optionsnew developments within your reach as you can upgrade to meet your changing requirements at any point. Flexibility – advanced technologies in harmony with modularityease of use to deliver your power control needs Efficiency – world class power control with innovative features to minimise your energy costs with exceptional process performance Peace of mind – a power controller that will bring you return on investmentcan be adapted in the future if your requirements change - one product for all solutions Revolutionary modularity and configurability to meet your needs... Easy ordering, configurationmaintenance through modular design If your requirements change EPower Controller can be easily adapted to your needs Minimum spares holding – many options configurable through a common driver module e.g. firing mode, load, phases, control etc. Up to four power modules provide single and multi-phase control Software configurable options to bring you flexibility: You no longer need to be restricted to the options that you order – EPower Controller provides you with configurable optionsmodular hardware to give you the flexibility to match your process nowin the future. Combine this with an instrument that provides easy configuration via the integral displayfull graphical configuration via iTools PC configuration tool as standard – you have a power controller that makes life that bit easier. www.eurotherm.com/EPower EPower™ Controller – extraordinary power control Control Type Single phase 2 x single phase 3 x single phase 4 x single phase Two phase 2 x two phase True three phase Firing Modes Phase angle Half cycle Burst firing Fix modulation period Logic mode Load Type Standard Resistive Complex Resistive Inductive e.g. Transformer Short Wave Infrared Load Configuration Single phase Star Delta Star with neutral Open Delta Feedback V2 I2 True power RMS load voltage RMS load current Open loop The options that you need... A single driver module can support up to four power modules –hence four independent control loops. Power modules are available in current ratings covering a range from 100A to 400A. The driver module itself supports option boards to give you additional flexibility in your solution: Communications – RS485 Modbus RTU, Profibus, DeviceNet®Modbus TCP network protocols Predictive Load Management (PLM)＊ – A powerful feature to effectively manage your power requirements across multiple machines to save on your energy costs Flexible I/O – The driver module supports standard I/Oup to three additional I/O boards with analogue inputs, analogue outputs, digital I/O and relay outputs. ＊ patent pending PLM PLM PLM Predictive Load Management The EPower Controller has been designed for easy configurationmodification. The front, integral display has a “QuickStart” facility that leads the user through initial set up in a series of simple steps. To further save engineering this QuickStart code can be specified with your orderthe instrument shipped pre-configured. More advanced configuration can be achieved utilising iTools PC configuration software – which provides the significant assistance of graphical wiring tools and downloadable function blocks to minimise engineering timecost. Once you have created your application you can easily saveclone your work – either as a back-up or to download to multiple instruments that need the same or similar configuration – keeping your work safesave repeat engineering costs. “QuickStart” for easy commissioning Easy saveclone of configuration Advanced graphical wiring configuration tools Integral front panel operator interface www.eurotherm.com/ E Power Easy configuration to save you engineering costs ... www.eurotherm.com/EPower EPower Controllers have measurement accuracy, functionalityinnovation that will deliver you extraordinary power control to help your process, environmentbudget. Measurement accuracy (better than 1%) to help save energy Load management for better distribution of energyto minimise peak energy usage costs Reduce energy billsother costs with a selection of advanced firing modes to best suit your load type: – Minimise electrical disturbance – Increase lifetime of heater elements Improve power factor Energy saving Easy maintenance Efficiency through advanced technologies... You can reduce your energy costs across your plant by utilising the Predictive Load Management (patent pending) functionality within the EPower Controller. This new feature provides a better distribution of energy across different loads in your installation, by managing the priority and, if necessary, load shedding, The EPower Controller prevents overshoot of the nominal power. This will keep you within the limits of your electrical contract for your installationprevent increases in energy tariffs imposed by your supplier. Unlike other software offering this type of feature, Predictive Load Management from Eurotherm anticipates your energy usage rather than just reacting when you have already exceeded your tariff peak. Using EPower Controllers with Predictive Load Management could well be one of the best value decisions you could make for your plant! www.eurotherm.com/ E Power Predictive Load Management – the best innovation for energy management Power consumed with “Predictive Load Management” PLM PLM PLM Predictive Load Management Power consumed without “Predictive Load Management” www.eurotherm.com/EPower A product to integrate into a complete solution EPower Controllers have not only been designed to be world-class power controllers that you can rely on, they have been designed to integrate perfectly into a wider control system. Whatever your system communication preferences are – Modbus RTU, Profibus, DeviceNet, Modbus TCP/IP – EPower Controllers can easily be integrated into your systemsend the information you need about your load (current, voltage, alarms etc) so that you stay in control of your process. Whether you need this latest power controller in a new system or to upgrade an existing system – Eurotherm can help you. Our expertise is not limited to power control – the full benefit of EPower Controllers can be optimised using our engineers as experts in creating complete solutionstotal, plant-wide DCS. Throughout our product ranges – controllers, recorders, power controllers, signal conditioning, automation solutionsDCS – you will get expert knowledge, supportworld class solutions. We can assist you with smalllarge applicationsoffer complete life cycle supportpartnership engineering teams – whatever you need, we are there to work with you. 3RD PARTY INTEGRATION OPERATIONS SERVER OPC SERVER BUSINESS SYSTEMS OPE V T820 LOCAL HMI 3216 CONTROLLER T2550 PROGRAMMABLE AUTOMATION CONTROLLER T2550 PROGRAMMAB AUTOMATION CONT EPOWER CONTROLLER www.eurotherm.com/ E Power 3RD PARTY INTEGRATION EYCON 20 VISUAL SUPERVISOR EYCON™ 10 VISUAL SUPERVISOR 6180A PAPERLESS GRAPHIC RECORDER ERATIONS VIEWER ACTIVE FACTORY T820 LOCAL HMI 32H8I EPOWER CONTROLLER REMOTE DISPLAY BLE TROLLER EPOWER CONTROLLER www.eurotherm.com/EPower Real-world applications VACUUM FURNACE IN HEAT TREATMENT BOOSTING POWER CONTROL AND MONITORING IN GLASS INDUSTRY Molten glass is a conductor of electricity. Passing high currents through the glass produces direct heating in the resistance presented by the glass, named boosting. This heating is beneficial as it heats the‘colder’ bottom glass in the furnace. This heated bottom glass rises towards the tophas a stirring effect which helps with melting, heat transfertemperature homogenisation. Boosting is often used to meet periodic fluctuations in production demand or to support the pull rate of a furnace at the end of its operating life. Boosting may also help to reduce NOx emissions. In this application the EPower Controller is controlling the power injected by the electrodes in the molten glass while controlling the true power or the current (the power injected is self compensated by the glass temperature) Controlled convection currents to promote homogeneity Accurate true power or electrodes current control Digital communication allowing process parameters to be monitored by a supervisor: current, voltage, poweralarms Electrodes Molten glass Three phase power supply T2550 Input/output control Eycon™ Visual Supervisor Vacuum furnace control Energy control Efficiency optimization EPower Controller Control Modularity Energy information Several switching modes iTools software configuration Digital communications Vacuum device Digital communication COMPOSITE MATERIAL In composite material production polymerisation is made in an autoclave at very high temperature. EPower Controller controls heating by providing: Detection of total and/or partial load failure Optimization of the distribution of heating control in the different areas providing real cost savings Standard communications for process controlmonitoring on HMI Down time reduction due to the modular design Policeman/Remote display Heater element control Power repartition in heating elements providing energy saving Alarm strategy Digital communication allowing supervisory control Use Predictive Load Management across multiple furnaces to reduce energy costs PLM PLM PLM Predictive Load Management Melting is one of the first steps in the ‘float’ process’. At this stage glass is in liquid state in a molten furnace at around 1550°C. Roof heating is made by silicon carbide heaters. EPower Controller controllers provide all the solutions to the multizone control of this specific heater elements. Ageing compensation of the silicon carbide heaters with power control Power distribution control in the heater elements providing cost savings: suppression of inrush current for a better energy managementa minimum stress on the power transformers Digital communication with standard protocols for an efficient process monitoring Use Predictive Load Management across the glass plant to reduce energy costs www.eurotherm.com/ E Power SEMICONDUCTOR MANUFACTURING Silicon was discovered in 1823 and is used in the manufacture of today''s semiconductors. Semiconductors need a silicon of a very high purity and, therefore, the silicon is transformed by successive stages (crystal growing, epitaxy) that need very slowaccurate heating. The EPower Controller will provide many solutions to this specific and expensive process: Precisesteady control of the heater elements Advancedconfigurable strategy enables the EPower Controller to adapt to the load state Secure your process utilising a comprehensive alarm strategyby transferring process information to a supervisor CONTINUOUS ANNEALING FURNACE After castingmilling, metals are passed through an annealing furnace in order to increase ductilityreduce brittleness. In the case of a continuous metal sheet, this is a multi-zone furnace consuming several Megawatts of power. Each zone consists of one or multiple thermocouples feeding the process variable (PV) into a temperature controller, Programmable Automation Controller (T2550 PAC) or PLC. The control device then calculates the required power input to meet the process set point (SP),sends this to the Power Controller via digital comms or via an analogue signal. The Power Controller then fires the element, either directly or via a transformer depending on the element specifications. Two-leg, true three phase control or 4 x single phase control available Load Sequencing - integral firing sequence control optimises instantaneous energy consumption across all zones Load Shedding - Predictive Load Management peak energy demand algorithm enables power smoothing to reduce peak demand Communication of PV, SPprocess data Remote configuration via comms or user interface TIN BATH FURNACE IN FLOAT MANUFACTURING Three phase power supply Multizone control Molten glass Multizone heating Roof heating with silicon carbide elements Supervisor Slave Master Network Multiple Slaves (1 per Zone) Zone 1 Zone n Continuous Annealing Furnace Transformer Transformer Molten tin PLM PLM PLM Predictive Load Management PLM PLM PLM Predictive Load Management With EPower Controllers you are not only buying one of the best power controllers in the world, you are supported by a global network of application and control specialists from Eurotherm. While we are a truly global company, we have not forgotten that you still need local supportunderstanding. Our team will bring you technical expertise along with in depth experienceunderstanding in numerous application areas – from glass furnaces, to semiconductor manufacture, to the heat treatment of metalsmany more. The EPower Controller is one product for all your solution needs. We can provide you with a range of services to suit your needs – from training to commissioning and maintenance contracts for your installation. Easy Maintenance Modular design for easy management of spare partsquick mean time to repair (MTTR) Fasteasy configuration Easy wiring, installationcommissioning Remote Display option www.eurotherm.com/EPower The EPower Controller – the best solution for your power control With EPower Controllers, you will obtain an excellent return on your investment www.eurotherm.com/ E Power Selection guidetechnical specifications DRIVER MODULE POWER MODULES (UP TO 4) SUPPLY VOLTAGE 85 to 264V ac SUPPLY FREQUENCY 47 to 63Hz POWER CONSUMPTION 120W TEMPERATURE LIMITS 0 to 50°C operating, -10 to 70°C Storage DISPLAY 4 lines dot LCD matrix array COMMUNICATIONS Modbus RTU 2 wire EIA485 Modbus TCP/IP 10baseT Ethernet Profibus DPv1 DeviceNet network protocol INPUTS AND OUTPUTS Standard 2 Analogue inputs 1 Analogue output 2 Digital inputs 2 Relay outputs (1= Watchdog) Optional modules (max 3) Per module - 1 Analogue input 1 Analogue output 2 Digital inputs 1 Relay MEASUREMENT ACCURACY Better than 1% REMOTE PANEL Dedicated remote panel port PlugPlay 32h8i panel indicator QUICKSTART Configurable by order code or on start up via dedicated front panel HMI PREDICTIVE LOAD MANAGEMENT (PLM) Optional module connecting up to 63 instruments over dedicated communications (CAN based). Configurable PLM (patent Pending) optimises energy usage APPROVALS CE (EN 60947-4-3), UL 508A VOLTAGE RANGES 100 to 600V ac, 100 to 690V ac CURRENT RANGES 100A, 160A, 250A, 400A, Nominal current range 16 to 400A FREQUENCY 47 to 63Hz POWER DISSIPATION 1.3 watts per Amp per Power module OPERATING TEMPERATURE Nominally 40°C, Operation 0 to 50°C de-rating applied over 40°C COOLING FANS ≥160A FAN SUPPLY 115V or 230V FIRING MODES Phase angle Half Cycle Burst Firing Fixed Modulation Logic LOAD TYPES Standard Resistive Complex Resistive Inductive loads e.g. Transformer LOAD CONFIGURATION Single phase Ph/Ph or Ph/N Two leg control 3 wire star or delta Three phase control 3 or 4 wire star, 3 or 6 wire delta POWER MODULE COMBINATIONS 1, 2, 3 or 4 single phase (1, 2, 3 or 4 modules) 1, or 2 x two leg (2 or 4 modules) 1 x 3 phase (3 modules) FEEDBACK Internal voltagecurrent Order option – External voltagecurrent FEEDBACK TYPES Open Loop V2 I2 True Power Vrms Irms APPROVALS CE (EN 60947-4-3), UL 508A
無吉林可控硅調功器 可控硅調功器 可控硅調功器廠家--中凱溫控
富安時三相可控硅調功器價格ZA300三相可控硅調功器參數
富安時三相可控硅調功器價格ZA300三相可控硅調功器參數
郵箱:fuanshi666@163.com
bhc6m-2可控硅調功器
BHC6M-2型系列三相可控硅調功器是運用數字電路觸發可控硅實現調壓和調功。調壓采用移相控制方式，調功有定周期調功和變周期調功兩種方式。該控制板帶鎖相環同步電路、自動判別相位、缺相保護、上電緩起動、緩關斷、散熱器超溫檢測、恒流輸出、電流限制、過流保護、串行工作狀態指示等功能。該控制板的觸發有兩種方式：直接觸發可控硅模塊、觸發移相型固態繼電器。BHC6M-2控制板的特點：十位A/D，輸出線性化程度高，輸出起控點低。
BHC6M-2系列三相電力調整器（說明書中簡稱BHC6M-2整機）由BHC6M-2觸發板、BHC6M-2專用散熱器、風機、外殼等組成。核心部分使用BHC6M-2控制板與德國西門康可控硅模塊；散熱系統采用散熱器、低噪音風機。整機帶有控制板所有的功能。整機電流容量從40A到800A有7個等級。
該電力調整器與帶0-5V、4-20mA的智能PID調節器或PLC配套使用；主要用與工業電爐的加熱控制。負載類型可以是三相阻性負載、三相感性負載及三相變壓器負載；三相負載可以是中心接地負載、中心不接地負載、內三角形負載及外三角形負載。
一.
1.控制板電源與功耗
電源：380V AC ±10% 50HZ, 要求與負載電源同相位（取線電壓）
功耗：5W最大
外形尺寸：長×寬×高=175×150×40mm
2.控制輸入
420mA DC, 接收阻抗120Ω（默認輸入信號，輸入端子C+、C-）
以下三種輸入定貨時需說明（輸入端子也是C+、C-）：
0~10V DC 輸入, 輸入電阻 > 450KΩ
0~5V DC 輸入, 輸入電阻 > 450KΩ
0~20mA DC 輸入, 輸入電阻 > 450KΩ
3.控制方式
調壓控制：連續調壓
調功控制：阻性過零調功，感性特殊調功
4.調節輸出分辨率（采用十位A/D轉換）：調相0.2°,調功 20ms
5.低起控點
輸入起控點：4.6mA
調壓時輸出電壓起控點： 8V（中心接地）；15V（中心不接地）
調功時輸出起點：4%（不同調功方式輸出波的個數不同）
6.移相范圍
0～175°,星型負載（中心點接地）
0～145°,三角型負載或星型負載（中心點不接地）
STATE | ||||
7.驅動輸出（兩種方式）
直接觸發可控硅模塊：（接線見圖二A）
可變寬度脈沖：8°～ 120°
驅動電流：150mA
觸發移相型固態繼電器：（接線見圖二B）
可變寬度脈沖：8°～ 120°
電壓：8V
電流：20mA
8.緩起動、緩關斷
調壓控制時帶此功能，時間由P3電位器調整。調整范圍：0.2 ~120秒，緩啟動、緩關斷時間一樣。
9.散熱器超溫保護
70℃溫度開關，常閉接點
動作時間：< 20ms
10.報警輸出（端子位置參考圖一）
當電源缺相、散熱器超溫，負載過流時動作
規格：1組常開接點，1A 250V AC 純阻
輸出端子：CN8-2、CN8-3
11.調功/調壓切換(選件)
U1端：CN9-3端子，GND端：CN9-4端子
U1和GND短路：調壓(出廠設置), 開路：調功
12.串行狀態發送(選件)
電流環串行狀態發送，配DDR-R串行狀態接收器
發送端子：SD+(CN9-1)、SD-(CN9-2)
五種狀態輸出：運行、散熱器超溫、過流、缺相、控制板電源
13.三相相位檢測
三個紅色LED燈指示，自動判別相位
紅燈亮：相電壓正常；紅燈滅：相電壓異常
14.負載電源
三相380V AC ±10% 50HZ
15.負載電流容量
40，80, 150, 225, 300A AC
16.風機電源
電壓：220V AC 電流：0.5 A以下
17.工作環境和存儲溫度
溫度范圍：0~40℃
濕度范圍：90% RH最大，無結露
海拔高度：1000 m以下
存儲溫度：-10~55℃
其它要求：通風良好，不受日光直射或熱輻射，無腐蝕性、可燃性氣體
18.安裝形式和要求
壁掛式，垂直安裝
19.絕緣電阻/介電強度
絕緣電阻： 模塊輸出端與外殼，500VDC 20MΩ最小
控制板電源端與外殼，500VDC 20MΩ最小
控制輸入端與外殼，500VDC 20MΩ最小
控制板輸入端與電源端，500VDC 20MΩ最小
介電強度： 模塊輸出端與外殼之間，2000VAC 1分鐘
控制電源端與外殼之間，2000VAC 1分鐘
二. 安裝及使用須知：
l
l
l
l
l
l
（1）觸發板選型單
代碼功能 | <TD style="BORDER-R
CD3000M/CD3000S/CD3000ECD可控硅調功器
可控硅調功器CD3000是一種起導通/關斷作用的半導體設備,它由兩個反并聯的可控硅整流器(SCR)構成.該可控硅調整器結構堅固,專門為工業環境而設計.主要應用在:玻璃窯爐,擠壓機,工業窯爐,干燥設備,塑料機械,熱成型機械,汽車工業,印刷機械,產品范圍廣泛,輔助器件有CD-RS,總線模塊TU-PB,TU-DN,CD EASY,自動/手機操作單元CD-AM.電流互感器用于加熱器斷線檢測.意大利CD調功器:CD3000S-1PH、CD3000S－2PH、CD3000－3PH、CD3000M－1PH、CD3000M－2PH，CD3000－3PH，CD3200、CD3000E－2PH、CD3000E－3PH，MULTIDRIVE－1PH、MULTIDRIVE－2PH、MULTIDRIVE－3PH；觸發方式有過零、移相觸發；負載類型有阻性負載、感性負載、變壓器負載；電流10A/700A一25A/2600A，電壓480V一600V，MODBUS RS485通訊功能，診斷和狀態LED指示，可控硅短路或開路報警，可現場組態，CE認證，廣泛應用于冶金、化工、熱處理、擠出機，玻璃行業。
7300A歐陸三相可控硅調功器
7300A三相可控硅調功器
通訊
GTT可控硅調功器
GTT可控硅廠家;可控硅報價;可控硅價格 可控硅調功器GTT 主要特征： 1. 輸入信號為模擬電壓或電流信號及電位器信號 2. 可變周期過零觸發 3. 反相并聯雙可控硅 4. 控制電路和功率電路之間的絕緣電壓高達4000V 5. 過熱指示 6. 可選的負載斷路監視 7. 導軌安裝 | |
| 詳細資料 | |
| 說明: 主要應用： 1. 塑料擠出生產線和注塑機械 2. 合成纖維產品的聚合工廠 3. 橡膠注塑機械 4. 瓷窯和建筑工業組件的干燥 5. 化學和制藥工業 6. 工業窯爐 7. 食品加工廠 | |
GTT可控硅調功器
GTT可控硅廠家;可控硅報價;可控硅價格 可控硅調功器GTT 主要特征： 1. 輸入信號為模擬電壓或電流信號及電位器信號 2. 可變周期過零觸發 3. 反相并聯雙可控硅 4. 控制電路和功率電路之間的絕緣電壓高達4000V 5. 過熱指示 6. 可選的負載斷路監視 7. 導軌安裝 | |
| 詳細資料 | |
| 說明: 主要應用： 1. 塑料擠出生產線和注塑機械 2. 合成纖維產品的聚合工廠 3. 橡膠注塑機械 4. 瓷窯和建筑工業組件的干燥 5. 化學和制藥工業 6. 工業窯爐 7. 食品加工廠 | |
最新產品
- 單臂焊煙凈化器 2024/11/26 20:22:02
- 風速傳感器多種量程可定制 風速變送器輸出類型可定制 2024/11/26 18:28:45
- 優勢供應#歐洲原廠進口#MAHLE備件 2024/11/26 17:41:16
- 優勢供應#歐洲原廠進口#TWK備件 2024/11/26 17:40:39
- 優勢供應#歐洲原廠進口#SCHUNK備件 2024/11/26 17:39:56
- 優勢供應#歐洲原廠進口#B+R備件 2024/11/26 17:37:32
- 優勢供應#歐洲原廠進口#SCHUNK備件 2024/11/26 17:36:20
- 優勢供應#歐洲原廠進口#SCHUNK備件 2024/11/26 17:35:01
- 優勢供應#歐洲原廠進口#WIKA備件 2024/11/26 17:34:18
- 優勢供應#歐洲原廠進口#MOOG備件 2024/11/26 17:33:29
- 優勢供應#歐洲原廠進口#REXROTH備件 2024/11/26 17:31:28
- 上海祥樹歐茂報價REXROTH備件 2024/11/26 17:30:42
- 上海祥樹歐茂報價WANDFLUH液壓閥放大器板 2024/11/26 17:30:18
- 上海祥樹歐茂報價SUPFINA夾具油缸 2024/11/26 17:30:00
- 優勢供應#歐洲原廠進口#GEMU隔膜閥 2024/11/26 17:29:59
- 上海祥樹歐茂報價MICRO-EPSILON備件 2024/11/26 17:29:40
- 上海祥樹歐茂報價CONTRINEX備件 2024/11/26 17:29:22
- 上海祥樹歐茂報價SIR備件 2024/11/26 17:29:05
- 上海祥樹歐茂報價BEI備件 2024/11/26 17:28:41
- 上海祥樹歐茂報價SIKA備件 2024/11/26 17:23:28
- 上海祥樹歐茂報價BETTIS密封圈維修包 2024/11/26 17:22:57
- 上海祥樹歐茂報價ROWAN ELETTRONICA驅動器 2024/11/26 17:22:39
- 上海祥樹歐茂報價RICA備件 2024/11/26 17:22:12
- 上海祥樹歐茂報價TERMATE插頭 2024/11/26 17:21:55
- 上海祥樹歐茂報價ELEKTRA電源開關 2024/11/26 17:21:18
- 上海祥樹歐茂報價EGO溫控器 2024/11/26 17:20:47
- 上海祥樹歐茂報價SITRON光電傳感器 2024/11/26 17:20:26
- 上海祥樹歐茂報價MOOG閥 2024/11/26 17:20:06
- 上海祥樹歐茂報價MTSUSHIMA開關 2024/11/26 17:19:48
- 上海祥樹歐茂報價TR編碼器 2024/11/26 17:19:30