国产高清在线视频,国产成人福利免费视频

塑料水管探測儀

塑料水管探測儀型號:ZD2RD500

貨號:

內容簡介： ZD2RD500塑料水管探測儀 ZD2RD500是探測塑料自來水管道最的設備，ZD2RD500塑料水管探測儀由發射機和手持式的接收機組成。發射機在消防栓、水表底座或水龍頭上給塑料管道施加一個特殊的壓力波信號，接收機的地震波傳感器接收該信號，從而對塑料管道進行定位。 ■表頭和聲音信號指示 ■開機電池狀況檢測 ■便攜式，重量輕 ■定位精度：埋深的5%（埋深2米時） 2.0 Fast Start Guide:Detailed operating instructions are also included on the side of the Receiver. These instructions are repeated her for your convenience:Transmitter Operating Instructions:1. Remove protective caps from transmitter2. Connect transmitter to nearest water outlet using kit supplied with transmitter3. Turn on waterloosen adjustment lock nut near T-handle4. Turn T-handle clockwise until water fl ows5. Turn T-handle counterclockwise until water pulses several times per second; tighten lock nutReceiver Operating Instructions:1. Turn ON/OFF knob clockwise to activate2. Initial meter reading indicates battery condition3. To replace battery, loosen battery release button, move housing upward to expose battery4. Begin initial tracing about 2 meters from transmitter or any other area where pipe location is known5. Push spike of receiver into ground near known pipe locationturn ON/OFF knob clockwise for mid-range meter readingadjust individual headphone controls for comfortable listening level6. To pinpoint pipe position, use receiver to probe ground until you fi nd peak maximum meter reading. You will also hear the pulsing sound similar to a heartbeat grow louder7. Trace the pipe by establishing the direction of pipe route by probing every one to two meters to locate a peak meter reading. Adjust the ON/OFF knob to maintain a mid-range meter readingNotesPrecautions:The ZD2RD500 is for use on water pipes only It works best on water pressures in the range of 3 to 7 Bars; maximum pressure 10 BarsThe Transmitter pulsating effect causes pipe movement. If used for extended periods or on substandard plumbing systems, leaks may resultAdditional NotesPrecautions:1. ZD2RD500 readings do not indicate depththe ZD2RD500 does not detect buried electrical power lines, gas lines or other hazardous underground objects, so always dig carefully in the proximity of buried pipes or cables2. Use caution while wearing headphonesbe alert to traffi c or other hazards that are normally heard outdoors3. Always stand clear of all transmitters, adapter kitshoses while they are connected to water systemsoperating4. On all hose bib applications, within 15 meters 50 feet of a building, the proper low-power transmitter GREENfaucet damper MUST MUST be used3.0 Transmitter Application Techniques:Transmitters are connected at sprinkler heads, hose bibs, water meter bases, fi re hydrantsclean-outs. Supplied transmitter adapter kits are illustrated in Section 5.0 of the OperationalManual. Always fl use any connection site until the water that fl ows is clear of all rust, silt, sealing compoundsforeign materials before connecting a transmitter to the water line.Refer to Section 5.0 for a detailed description of the receiver kitthe adapter kits that are available. All adapter kits are supplied with a 3-meter 10 foot high-pressure drain hose that must be connected to the outlet of the transmitter in order for the device to work properly.Always use a weight on the hose or tie the hose down to prevent the hose from whipping.Check the water pressure before attempting to locate the water linemake sure that it is in the operating range of the transmitter, which is 3 to 10 Bars 40 to 140 psi.4.0 Receiver Application Techniques:Two devices are provided for probing the surface with the ZD2RD500 receiver. A 14cm 5.5 inch ground spike is supplied for soft surfacesa brass hard surface plate is included for hard surfaces such as concrete or tarmac asphalt. The hard surface plate has concentric recessed channels in its surface that allow it to be positioned such that it lays fl at against surfaces.The ZD2RD500 is supplied with high quality headphones that have independent volume adjustments on each ear piece. Using non-standard headphones may reduce system performance; create oscillation in the audio outputcause mechanical damage to the headphone jack.Pinpointing pipe location is difficult without using the meter to measure signal level. It is very difficult for the average person to discern slight variations in audio signal levels. Always adjust the sensitivity so as to maintain a mid-scale meter reading while locating. Typical location accuracy is plus or minus one pipe diameter. Always probe or expose the pipe to confirm the exact location before performing any excavation.Best location results are obtained by beginning your tracing at least 3 meters 10 feet from the location where the transmitter is connected. The signal levels are normally too strong in the area immediately surrounding the transmitter. Alternately, tracing may begin at a known pipe location that is not more than 75 meters 250 feet down the pipe from the transmitter.The preferred method for tracing pipes is to locate at least two known pipe locations that indicate the heading or direction that the pipe is laid. Readings should be taken along an imaginary line that runs perpendicular to the pipeline. Confirm a peak signal reading by taking additional readings that are equal distances from the peak location. These readings should be lower than the peak readingapproximately equal.Once the pipe direction is determined, it is possible to quickly trace the pipe along this headingconfirm any changes in direction by periodically taking readings.Always transportstore your receiver in the carrying case to protect it from damage. If the receiver is allowed to fall overstrike a hard surface it may permanently damage the meter.5.0 ReceiverAdapter Kit Details:The receiver kit, sprinkler/hose bib kit, fire hydrant kitwater meter kit details are supplied for your reference in identifyingmaintaining the equipment.5.1 Receiver Kit Details:

產品圖片

PPR20-800立方米/時射流真空泵PPR噴射器(增強聚丙烯塑料型)

SLZ射流真空泵

SLZF玻璃鋼射流真空泵

PPR增強聚丙稀射流真空泵

射流真空泵在國內是一種新型的低真空設備，在廣泛的范圍內可取代水環式和往復式真空泵。

射流真空泵是利用水的高速噴射產生負壓來達到抽吸真空的目的。

射流真空泵的顯著特點是：節油、節水、節電、工作、維修費用低，使用壽命長、安裝方便、耐腐蝕、耐高溫，在抽真空的同時又具有冷凝吸塵，吸收，排氣，強化反應等作用，可做真空輸送物料，真空蒸發，真空脫水，真空結晶，真空濃縮，真空過濾，真空干燥，化學吸收，真空除氧，供氧，也可用于環保吸塵，改變環境污雜和勞動條件。還可以抽吸有毒，有腐蝕性散顆粒狀氣體和易燃易爆氣體和液體。

射流真空泵廣泛應用于化工、制藥、輕工、化纖造紙，塑料、橡膠、石油、環保、制磚、、精煉油、食品、冶金、紡織等行業，暢銷國內二十多個省市。

特別是新開發的增強聚丙稀（PPR）真空泵具有鋼鐵的韌性和硬度，又具有玻璃鋼的耐腐蝕性，且價位更低，應用范圍更加廣泛。

PPR塑料型射流真空泵及其配套設備的規格型號與性能參數
PPR塑料型射流真空泵及其配套設備的規格型號與性能參數
型號	真空泵的性能參數					配套水泵參數			配用電機參數
	真空泵的性能參數					配套水泵參數			配用電機參數
	極限真空度		抽氣量m3/h	蒸發量升/時	工作壓力kg		流量m3/h	揚程m	功率KW	轉數r/min
	Mpa	mmhg	抽氣量m3/h	蒸發量升/時	工作壓力kg		流量m3/h	揚程m	功率KW	轉數r/min
20	-0.098	-735	28	100	1.8		12.5	20	1.5	2900
40	-0.098	-735	45	200	2.4		12.5	35	2.2	2900
60	-0.098	-735	72	300	2.5		25	20	3	2900
100	-0.098	-735	140	500	2.8		25	32	4	2900
200	-0.098	-735	260	800	3		50	32	5.5	2900
300	-0.098	-735	360	1200	3.6		45	45	7.5	2900
400	-0.098	-735	440	1600	4.2		50	50	11	2900
500	-0.098	-735	560	2000	4.5		90	45	15	2900
600	-0.098	-735	650	2500	4.8		100	50	18.5	2900
700	-0.098	-735	730	3000	6		85	70	22	2900
800	-0.098	-735	840	3500	6.5		93	75	30	2900

HQY-96塑料球壓痕硬度儀

HQY-96 塑料球壓痕硬度儀一產品名稱：塑料球壓痕硬度計 二產品型號： HQY-96

三主要用途及功能：

　 1、塑料球壓痕硬度儀是一款測定高分子材料抵抗另一種被視做沒有彈性變形的剛性物體對它壓入的能力。

2、該機采用微處理器控制，具有數字化、集成化、等優點；是一種新型儀器，可自動加載，自動計時及數字位移檢測，采用彩色液晶中文顯示，自動打印等多種功能。

3、該機還具有用￠1.8 mm壓頭，做24小時耐壓試驗的功能，適用于油田行業標準。是同類產品中性能價格比的儀器。

4、該機符合GB/3398、 ISO2039 的標準要求，其主要參數滿足DIN53-456標準要求。可對汽車用工程塑料及其它行業材料的硬度來進行測定。

注：可根據用戶要求配有英文操作方法

四主要技術參數：

　試驗負荷： 9.8N（預加載） 49N 132N 358N 961N共五級

　壓頭鋼球直徑：￠5 mm ￠10 mm （￠1.8 mm選用

　示值精度： ±1％

　計時量程：10-100秒球壓痕試驗，

30分鐘—24小時（耐壓試驗適用于油田標準）

　計時精度： ±1 %

　機架變形量： ≤0.025 mm

壓痕深度指示最小分度值: 0.001 mm

　深度測量范圍： 0.15 mm-0.35 mm

　試樣允許最大高度： 30 mm

五主要配置及附件：

　主機一套

　主機壓頭（￠5mm ￠10mm選用）

（￠1.8mm 可根據具體客戶需求選用）　

微型打印機一臺

使用說明書一份

標準硬度塊一塊

計量檢定證書一份

相關產品鏈接：

。HRZ-400 熔融指數儀 HQY-96 塑料球壓痕硬度計 HWK-300 熱變形維卡

。HJC-50KV 電壓擊穿 HDW-20KN電子萬能試驗機 HDS系列電子拉力試驗機

。HMD-300 馬丁耐熱 HLH-20泡沫塑料落球回彈儀 HLC-300落錘沖擊試驗機

。HLB-30系列落鏢沖擊 HCJ系列擺錘沖擊試驗機 HCJ液晶式?jīng)_擊試驗機

。HACJ-50安全帽沖擊 HYW系列液壓萬能試驗機 HYX-1200泡沫壓陷硬度儀

。HWN-15 萬能制樣機 HCY-12測厚儀 HQK-I 缺口制樣機

。HYL-II啞鈴制樣機 HCP-25沖片機 HGC-500管材耐壓爆破試驗機

AFR-250/AF-200/AF-250/AF-200/AFR-200/AFR-100/150氟塑料鐵氟龍高溫線

1.高溫線

1. AF-200/ AFP-200

2. AF-250/ AFP-250

3. AFR-200/ AFRP-200

4. AFR-250/ AFRP-250

5. AF-250A/ AFP-250A

6. AF/ AF-1/ AFP/ AFP-1

7. AFX 系列雙色線

導體：鍍銀/鍍錫銅絲，單股或多股絞合

絕緣： FEP、PFA 或 ETFE鐵氟龍

溫度及電壓范圍：

130～150℃，600V

180～200℃，600V

230～260℃，600V

顏色：具體顏色由客戶指定

2屏蔽/護套高溫電纜

1. AFF 氟塑料絕緣氟塑料護套安裝電纜

2. KFF 氟塑料絕緣氟塑料護套控制電纜

3. AFP 氟塑料絕緣鍍錫銅絲編織屏蔽電纜

4. AFB 氟塑料絕緣玻璃纖維編織防火電纜

5. AFPF氟塑料絕緣鍍錫銅絲編織屏蔽氟塑料護套電纜

6. AFBF氟塑料絕緣玻璃纖維編織氟塑料護套防火電纜

7. AFG 氟塑料絕緣硅橡膠護套軟電纜

8. AFPG氟塑料絕緣鍍錫銅絲編織硅橡膠護套軟電纜

03. GJB773A-2000 航空航天用軍標電纜

1. FF4-3 系列鍍鎳銅芯聚四氟乙烯絕緣電線電纜

2. FF4-3Q 系列鍍鎳銅芯聚四氟乙烯絕緣輕型電線電纜

3. FF4-2 系列鍍銀銅芯聚四氟乙烯絕緣電線電纜

4. FF4-2Q 系列鍍銀銅芯聚四氟乙烯絕緣輕型電線電纜

5. FF46-1 系列鍍錫銅芯聚全氟乙丙烯絕緣電線電纜

6. FF46-2 系列鍍銀銅芯聚全氟乙丙烯絕緣電線電纜

7. FF46-2Q 系列鍍銀銅芯聚全氟乙丙烯絕緣輕型電線電纜

04. 鐵氟龍雙層絕緣線/三層絕緣線

05. 300～1000℃高溫線纜

06. 150～250℃鐵氟龍高溫線

07. 電動車專用八芯線

08.硅膠線、軟高壓線、高壓電纜等

電線的工作溫度：≤180℃

適用于交流額定電壓500V\1140V\6000V\ 5kV\ 10kV\ 15kV\ 20kV\ 25kV\ 30kV

可為客戶訂做各種規格的高溫線、鐵氟龍氟塑料線

LZB-S型系列LZB-S型塑料管浮子流量計

LZB-S型塑料管玻璃轉子流量計重量輕，耐腐蝕，不易破碎，無毒無味，使用方便，主要用于化工、輕工、醫藥、環保、食品等部門。

塑料光纖_Toslink, F05, SMI

音響用塑料光纖

塑料光纖傳輸接收端子

Application Fiber core: Plastic Optical Fiber （ ?1.0mm ）

Optical Fiber Cable Outer Diameter: ?2.2mm; 4.0mm; 5.0mm; 6.0mm

Application Light Waver length: 655±30nm LED

Attenuation of Optical Fiber: Less Than 0.18dB/meter

Allowable Bending Radius: ≧25mm

Standard Patch cord Length: 100cm （+5/-0）

Plug Ferrule Ending: Hot Plate at the Tip

Connection Loss: ≦0.5dB

陶瓷插芯（Ferrule）/套筒（sleeve）,光纖連接器跳線尾纖,光纖適配器（法瑯盤）,光纖轉接接頭（適配器）,光纖衰減器,光纖分歧器,波分復用器（WDM/CWDM/DWDM ）,光纖隔離器,光纖濾波器,光纖準直器,光纖環形器,光纜及終端設備,光纜接續（頭）盒,光纜終端箱,光纖熔接機（電極棒）,光纖切割刀（刀片）,光纖對接器（V型槽）,光源光功率計,光纖電話機,光時域測試儀（OTDRs）,光纖可視故障定位儀（光筆）,光纖回波損失測試儀,光開關,光纖收發器光電轉換器,光纖研磨機組裝工具,SMA905_高功率傳輸光纖連接器,塑料光纖_Toslink, F05, SMI 音響用塑料光纖,鍇裝軟光纖跳接線,感測光纖光纜,FTTH

PC-400塑料粉碎機

1.采用進口工具鋼，特制刀具，特別耐用，刀具安裝設計可伸縮調整，2.用鈍后可多次更磨，反復多次使用，使用壽命特長。3.動刀座為梯級剪式裝備設計，使切屑受力分解，造成切屑力成倍增長。4.動刀座材料為T7鋼材材料，剛?cè)岷侠恚灰灼屏鸦蚰p，采用高強度（8.8）鋼螺絲緊固，結構堅實耐用。5.機主體為結構材料，使用不因破碎物料而影響機械性能。機主體軸心也與雙端面由高精度座標鏜依次加工完成，確保同心度及垂直度，每個零部件都設定基準孔，面進行粗，精兩次流水加工工藝，部件互換性強精度高。6.裝配重荷型軸承及于破碎室設置雙層密封裝置，動刀座與主軸采用熱合裝配，工藝，動刀配合間隙少于0.05MM，防止份碎粉末泄入軸承座內而加重電機負載，克服了破碎機的關鍵故障因素。粉碎機室前后部為雙層隔音，中間填充隔音材料，噪聲極低。7.分離設計，落料斗，粉碎機主體，過濾網底座均按基準孔裝配，極易拆洗清料，設有清洗料室，調整刀具保護掣，確保清洗或調整時的安全。8.電機裝置過荷保護裝置，與電源連鎖保護系統，保障安全。9.耗電省，節能，粉碎效果特佳，底坐裝置滑輪，移動方便，體積精巧不占空間。

sjp-180型塑料造粒機

特點;1. 本機是分體/整體式煤｛氣）電兩用廢舊塑料再生造粒機,2. 可擠出塑化造粒聚丙烯（PP）, 聚乙稀（pE）, 聚氯乙�。≒vC）, ABS, EpS等。3. 主機中配有排水, 排氣裝置, 可直接加工帶水廢舊塑料。4. 廢舊編織袋不需拆線, 剪邊, 可直接放入主機內生產。5. 主機配置有微電腦自動溫控柜, 性能穩定, 操作簡便。6. 能耗低, 節能, 噸耗電200元左右。7. 主. 付機鏍桿, 鏍筒采用碳素結構鋼, 經特殊工藝處理, 高頻淬火提高了鏍桿, 鏍筒的機械強度, 使用壽命是普通鏍桿的2-3倍。8;本機配備電動機械模具。9. 金興隆牌pS廢舊泡沫塑料造粒機是我廠推出可生產XPS, EPS, PS多用途造粒機, 可生產泡沫料塊狀料及回頭料等, 其性價比顯著。

方式; 出口質量, 國內價格, 廠價直銷, 機組配套, 免費考察, 免費培訓, 免費提供產品銷售信息及廠家, 指導生產, 保出產品, 根據客戶需求免費上門安裝調試, 代辦運輸。購買金興隆塑機投資放心, 用戶省心, 生意興隆, 財源廣進。

塑料瓶

Useful for media preparation and culture, especially when light is required. Ideal for storing or dispensing reagents or distilled water. Practical for use in cold rooms, even at subfreezing temperatures. Carboys are graduated in 1-gallon and 5-liter increments. Carboys without spigot are graduated to contain; carboys with spigot are graduated to deliver. Cap included. Cap size: 83B. Leakproof. Autoclavable.

霧化脫硫除塵器浮球,實心塑料微球,化工填料塑料空心球,塑料實心球（微球）,聚丙烯空心浮球,空心塑料球

含量（%）：≥100

材質：PP/PE

溫度：≥100℃

規格：10mm25mm38mm45mm65mm75mm10mm

用途：廣泛用于化學工業尾氣凈化、煙氣除塵、廢氣回收、酸霧凈化等。它具有吸收效果好、凈化效果率高等特點

亚洲视频福利,日本精品一区二区三区在线,日韩欧美在线视频一区二区,国产高清自产拍av在线,99久久99久久精品国产片果冻,国产视频手机在线,成人禁在线观看午夜亚洲