型號:RL035450LD-5C(B)激光粉塵檢測儀 | 型號:RL035452LD-3F型防爆激光測塵儀 | 型號:RL035455LD-3C 激光粉塵儀 |
LD-5C(B)激光粉塵檢測儀
LD-5C(B)具有新世紀國際先進水平的新型內置濾膜采樣器的微電腦激光粉塵儀,在連續監測粉塵濃度的同時,可收集到顆粒物,從而可對其成份進行分析,并求出質量濃度轉換系數K值?芍弊x粉塵質量濃度(mg/m3),具有PM10、PM5、PM2.5及TSP(Total Suspended Particle)總空中懸浮物切割器供選擇.儀器采用了強力抽氣泵,使其更適合需配備長采樣管的中央空調排氣口PM10可吸入顆粒物濃度的檢測。
儀器符合工業企業衛生標準(GBZ1-2002)、工作場所有害因素接觸限值(GBZ2-2002)標準、衛生部WS/T206-2001《公共場所空氣中可吸入顆粒物(PM10)測定法-光散射法》標準、勞動部LD98-1996《空氣中粉塵濃度的光散射式測定法》標準以及鐵道部TB/T2323-92《鐵路作業場所空氣中粉塵測定相對質量濃度與質量濃度的轉換方法》等行業標準以及衛生部衛監督發〔2006〕58號文件頒布實施的《公共場所集中空調通風系統衛生規范》。
主要技術指標
1.配置40mm濾膜在線采樣器;
2.具有可更換粒子切割器PM10、PM5、PM2.5及TSP供選擇;
3.直讀粉塵質量濃度(mg/m3);
4.大屏幕液晶顯示器,漢字菜單提示;
5.檢測靈敏度:低靈敏度0.01mg/m3;高靈敏度0.001mg/m3;
6.重復性誤差:±2%;
7.測量精度:±10%;
8.測量范圍:0.01~100 mg/m3;0.001~10 mg/m3;
9.測定時間:0.1分鐘,1分鐘(標準測量時間),及(1-9999)分鐘任意設定;
10.具有公共場所監測模式、大氣環境監測模式以及勞動衛生模式?捎算出時間加權平均值(TWA)和短時間接觸允許濃度(STEL)等;
11.存貯:一般測量,可循環存儲99組數據。連續監測,存儲9999個濃度值-通過PC機讀。
12.定時采樣:可設定測量時間(1~9999)秒,關機時間(0~9999)秒,預熱時間(0~10)秒及采樣次數(1~9999)次;
13.粉塵濃度超標報警閾值設定:濃度閾值: 65mg/m3;測定時間:(1~9999)秒;
14.輸出接口:
(1)PC機通訊串行接口:RS232;
(2)微型打印機輸出接口;
(3)模擬量輸出接口:0—1V;
(4)數字量輸出接口:電平信號。
15.電源:Ni-MH充電電池組(1.2V x 4),可連續使用8小時;附220VAC/12VDC電源適配器;
16.重量:2.4kg。
主要技術特點
1.設計了可更換的粒子切割器,實現了PM10、PM5、PM2. 5、TSP多種粒子分離切割器兼容。
2.設計了在線濾膜采樣器,實現了連續監測粉塵濃度與濾膜采樣兼容,可以分析所收集到顆粒物的成份以及求出該場所的質量濃度轉換系數K值。
3.采用激光光源,質量濃度轉換系數不受顆粒物顏色的影響。
4.采用大屏幕液晶漢字顯示,實現了漢字菜單提示。
5.設計了恒流控制器,確保采樣流量恒定,切割曲線的正確。
6.具有內裝光學標準散板,確保儀器高穩定性。
7.具有特別的保護氣幕,避免了粉塵對儀器核心部件—光學系統的污染,確保儀器高可靠性。
8.通過計算機軟件實現儀器零點自動調節,提高了儀器測量精度,方便了用戶使用。
9.儀器設計了定時采樣機構,可根據設定時間定時采樣,定時啟動及關閉,所得數據可通過微型打印機記錄或?qū)隤C機進行數據處理,而使儀器適合于大氣環境可吸入顆粒物連續監測。
10.儀器可設定粉塵濃度超標報警閾值,粉塵超標時自動聲光報警,或?qū)⑿盘?hào)傳輸?shù)娇刂浦行倪M(jìn)行監控。
11.儀器設計了模擬量輸出接口,對空氣凈化器進行評價時,可繪制出凈化效率評價曲線。
12.除設有適合室內公共場所粉塵監測的一般測量模式和適合大氣環境監測的定時采樣模式外,新增加了勞動衛生模式,在此模式下,根據工業企業衛生標準(GBZ1-2002)和工作場所有害因素接觸限值標準(GBZ2-2002),計算出時間加權平均值(TWA)以及短時間接觸容許濃度(STEL)。
欄目頁面:http://www.runlian365.com/chanpin/4713.html激光粉塵儀來源網址:http://www.runlian365.com/chanpin/did-35450-pid-4713.htmlLD-5C(B)激光粉塵檢測儀型號:RL035452LD-3F型防爆激光測塵儀
LD-3C型激光粉塵儀是以激光為光源具有國際水平的型袖珍式粉塵儀。符合行業標準的快速測塵儀;已有千臺以上在全國各地使用。 該儀器適用于公共場所可吸入顆粒物(PM10)濃度的快速測定、工礦企業生產現場等勞動衛生方面粉塵濃度的檢測,以及環境保護領域可吸入塵濃度的監測,還可用于空氣凈化器凈化效率的評價。 ·引進日本全套生產制造及檢測標定技術及設備 ·符合行業標準WS/T206-2001《公共場所空氣中可吸入顆粒物(PM10)測定方法- 光散射法》 ·符合勞動部行業標準LD98-1996《空氣中粉塵濃度的光散射式測定法》 ·符合鐵道部行業標準TB/T2323-92《鐵路作業現場粉塵測定相對質量濃度與質量濃度轉換方法。 Preview: LD-3C model laser dust monitor is an intelligent multifunctional portable monitor developed by Beijing BINDA Green Technology Ltd. –the former Dust Group of Beijing Institute New Technology Application. Being one kind of advanced world standard dust monitor, the monitor can be used to quickly measure inhalable particle--PM10-- concentration in public, measure the labor hygiene related dust concentration at the field of production and monitor inhalable dust concentration in environmental protection, as well as evaluate the efficiency of an air cleaner. The monitor is a light-scattering one with a laser light source. The quality control comes up to the national technology supervision ministry’s standard—Light-scattering Type Digital Dust Monitor Quality Control Regulations JJG 846-93 and the operation comes up to the labor ministry’s standard—Light-scattering Measurement of the Dust Concentration in Air LD98-1996 and hygiene ministry’s standard—Measurement Method of Inhalable Particle Concentration (PM10) in Air in Public, Light-scattering Method WS/T206-2001. 主要特點: alsodelivered, manual timing can set any available sampling time. 4. Measuring accuracy: ±10%. 5. Display screen: 4 digit liquid crystal screen with indications 6. Data Storage: Cycle store 99 group of data. 7.Time sampling: Measuring time interval 1~9999 second, Power off time 0~9999 second, warm-up time 0~10 second and sampling times 1~9999 can be set. 8. Setting dust concentration alarm threshold: concentration threshold less than 65 mg/m3; measuring time interval: 1~9999 second. 9. Output interfaces: (1) Serial interface for PC communication: RS 232; (2) Output interface of micro-printer; (3) Output interface for analog value: 0 – 1 V; (4) Output interface for digital value: level signal. 10. Power supply: Ni – MH rechargeable batteries group (1.2 V ´ 4), capacity for 8 hours, 220 V AC / 12 V DC adapter also provided. 11. Dimensions: 192 ´ 69 ´ 140 mm. 12, Weight: 1.4 kg .
Main Specifications: 1. Measuring sensitivity: LD- 3C(L) 1 CPM = 0.01 mg/m3; LD- 3C(H) 1 CPM = 0.001 mg/m3. 2. Measuring range: LD- 3C(L) 0.01 ~ 100 mg/m3; LD-3C(H) 0.001~10 mg/m3. 3. Measuring time interval: Standard time 1 minute. 0.1 minute and manual timing
|
產品相關關鍵字: 粉塵儀 |