多功能找水儀 水源探測儀 水源探測器 高密度水源探測儀
型號:JC18-K6-D6A
主要用途和特點
· 利用視電阻率法和激發極化法的有關參數,廣泛用于尋找地下水,解決人、畜飲用水及工農業用水問題。
· 用于水文、工程、環境的地質勘探,找斷裂帶及陷落柱、山體滑坡、煤礦 采空區等。
· 用于金屬與非金屬礦產資源勘探、能源勘探、城市物探、鐵道及橋梁工程勘探,并能用于地熱勘探高密度電法勘探
· 多參數同時測量:次電位Vp,自然電位Vsp,供電電流I、視電阻率Ro,視極化率M s、半衰時Th、衰減度D、綜合激電參數Zp和偏離度R。
· 可做高密度電阻率法測量:配接60道或120道的高密度開關進行相應的高密度電阻率方法測量。
· 多種排列方式: 采用大屏幕液晶漢字顯示,可直接顯示九種電極排列方式;鍵盤直接輸入布極參數;當某測點測完后可直接顯示電阻率曲線、視極化率曲線、半衰時曲線等。
· 資料解釋更方便:該儀器存儲的數據進行存儲。
· 每個測點為22個數據,設有RS-232串行接口,通過吉林大學的GeoElectro電法數字處理軟件系統可直接將存儲的數據傳入計算機內并進行各種方法的解釋及打印成果圖。
■ 主要技術指標
接收機部分
· 測量電壓范圍:-6000mV~+6000mV
· 測量電壓分辨率:0.01mV
· 測量電壓精度:±1% ±1個字
· 極化率測量:≤3%±0.2;≥3%±0.1
· 測量電流范圍:0~5000m A
· 測量電流分辨率:0.01 mA
· 測量電流精度:±1% ±個字
· 輸入阻抗: ≥50 MΩ
· 對50Hz工頻壓制80dB
· 有瞬間過壓輸入保護能力
· 有預置、記憶工作周期和9種野外常用工作方法選擇及其裝置系數輸入與計算功能
發射機部分
· 最大供電電壓:900V
· 最大供電電流:5A
· 儀器具有過壓過流保護裝置,供電小于某值
· 時表示AB有開路,儀器會有強制保護;
整機
· 整機工作溫度:-10℃~+50℃
· 濕度:95%
· 配套:不極化電極對,鋼電極10根
電阻率找水儀 水源探測器 尋找地下水電阻率探測儀
型號:DL05-K6-D8
要用途和特點
· 利用視電阻率參數,廣泛用于尋找地下水,解決人、畜飲用水及工農業用水問題。
· 微機控制、直讀電阻率、多種布極方式、掉電數據保護本儀器適用于地面和坑道進行垂直電測深法、電剖面法、充電法及自然 電位法等
· 電法勘探。廣泛 適用于水文、環保、工程物探、金屬與非金屬 礦產資源勘探等。
■ 主要技術指標
· 外接高壓電源:10V~700V;最大供電電流;3000mA。 儀器沒有過壓、過流裝置(注:用發電機供電必須接假負載,要求空載 電壓不超過700V)。
· 電壓測量范圍:-3000mV~ +3000mV;測量精度為±1.5% ±0.1mV.
· 電流測量范圍:0.1mA~3000mA; 測量精度為 ±1.5% ±0.1mA
· 可存貯800個測點的數據
· 自然電位補償范圍:-1000mV~+1000mV
· 儀器輸入阻抗:≥30MΩ
· 對50Hz工作抑制優于60dB
· 整機工作溫度:-10℃~50℃
水源探測儀/水源探測器/尋水儀 型號:M288432 | |
Geoelectric methods are used to explore groundwater resources. These methods are also applied in engineering geologyarcheological investigations for the detection of caves, voids, caverns, fractured zonesmetallic objects. General Description: It is based on a geo electric measuring method, to locate water deposits. The device is very easy to usespecially designed to detect water. The device has the following functionality: Automatic measurementanalysis Simple indication of measured results as percentage The evaluation of the measured results happens on sitewill be indicated in the integrated display. In a short calculating time the device will indicate how much water exists in the measured area in percentage. Technical Specification: Control Unit Operating Temperature 0 °C – 50 °C Storage Temperature -20 °C – 60 °C Air Humidity 5 % – 75 % Waterproof No Dimensions (H x W x D) 430 x 150 x 260 mm Weight about 3 kg Voltage 12 VDC Processor Motorola, 4 MHz In the following table you can see the complete delivery contentsall optional accessories. The used symbols have the following signification: x = x times included = not included = optional available, only for additional charge Description Carrying case 1 Control unit 1 Electrode with cable ( 20m ) 4 External power supply with chargercable ( 12V ) 1 User''s manual 1 | 產品圖片 |
水源探測儀/水源探測器/尋水儀 型號:M288432 | |
Geoelectric methods are used to explore groundwater resources. These methods are also applied in engineering geologyarcheological investigations for the detection of caves, voids, caverns, fractured zonesmetallic objects. General Description: It is based on a geo electric measuring method, to locate water deposits. The device is very easy to usespecially designed to detect water. The device has the following functionality: Automatic measurementanalysis Simple indication of measured results as percentage The evaluation of the measured results happens on sitewill be indicated in the integrated display. In a short calculating time the device will indicate how much water exists in the measured area in percentage. Technical Specification: Control Unit Operating Temperature 0 °C – 50 °C Storage Temperature -20 °C – 60 °C Air Humidity 5 % – 75 % Waterproof No Dimensions (H x W x D) 430 x 150 x 260 mm Weight about 3 kg Voltage 12 VDC Processor Motorola, 4 MHz In the following table you can see the complete delivery contentsall optional accessories. The used symbols have the following signification: x = x times included = not included = optional available, only for additional charge Description Carrying case 1 Control unit 1 Electrode with cable ( 20m ) 4 External power supply with chargercable ( 12V ) 1 User''s manual 1 |
產品型號:DT707- CT-SZ產品描述:本廠各種儀器適用于地面和坑道進行垂直電測深法,電剖面法,充電法及自然電位法等電法勘探。廣泛應用于水文、環保、工程物探、金屬與非金屬礦產資源勘探等。
本廠各種儀器適用于地面和坑道進行垂直電測深法,電剖面法,充電法及自然電位法等電法勘探。廣泛應用于水文、環保、工程物探、金屬與非金屬礦產資源勘探等。
技術指標:一、CT-SZ-I型:單液晶顯示,具有測轉開關轉換mA•mVCT-SZ-II型:雙液晶顯示,mA•mV二、鋁合金外盒:儀器可手動極補、自動極補兩用。三、儀器手動極補500mv、自動極補∞大。四、電位差、電流測量范圍:CT-SZ-I型:200~2000mV(200~2000mA)測量精度0.5%±1.CT-SZ-II型:200~2000mV(200~2000mA)測量精度0.5%±1.五、儀器輸入阻抗:大于10兆歐六、對50Hz工頻抑制優于60dB七、整機工作溫度:-10(度)+50(度)八、整機尺寸:315×215×120(mm)
測量地平面及山區找水(測量銅電極、軍用備服線):技術指標:一、地面找水,測量電極:紫銅管制造,Φ16mm,長度450mm二、測量找水被覆線 Φ2mm 四鋼三銅 三、測量找水備服線,聚氯乙烯外套 四鋼三銅 雙根、單根兩種四、雙對數坐標紙模數, 6.25mm
地面找水的基本配置:1.數字電子測量儀:1臺2.地面找水測量電極:4只3.測量找水備服線:700m(測量300米深)4.手動絞線車:4個5.坐標紙:1盒/100張。6.210V電