FZ-7804 插頭線滾桶跌落試驗機 PLUG TUMBLING BARREL TESTER IEC884-1、GB2099.1、VDE0620、BS1363 本機測試插頭線在經過一定次數自由跌落后的安全與度。試法是把插頭含后端電源線 100mm 處剪斷,作為試件,投入滾桶內,依試件重量設定標準所要求之跌落次數,使試件連續落下撞擊,到達設定次數后,本機自動停機,然后取出試件檢查受損程度。 Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel,then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。 滾動速度 Tumbling speed | 5r.p.m ( 即每分鐘跌落 10 次 ) | 計 數 器 Counter | 電子式,6 位數,到達設定次數自動停機 Electronic type 6 digits,auto-stop during the preset numbers are reached | 電源 Power | AC220V / 50Hz | |